Electrolux 500 TimeCare EW6T3226B3 User Manual page 18

18 www.electrolux.com
11.3 Setting a programme
1. Turn the programme knob and set
the programme:
• The indicator of the
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the indicator
flashes red.
11.4 Starting a programme
without the delay start
Press the
• The indicator of the
flash and stays on.
• The programme starts, the lid
locks, the indicator
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
11.5 Starting a programme with
the delay start
1. Press
set.
Detergent compartment for prewash phase.
Detergent compartment for washing phase.
Compartment for liquid additives (fabric conditioner, starch).
The mark is the maximum level for the quantity liquid additives.
M
.
is on.
to set the delay you want to
The indicator of the set delay is on. The
indicator
2. Press
• The appliance starts the
flashes.
• When the countdown is
To cancel the delay start :
a. Press
b. Press
stops to
11.6 The SensiCare System
load detection
After touching the Start/Pause
button:
The SensiCare System starts estimating
the weight of the load to calculate the
real programme duration. The appliance
automatically adjusts the programme
duration to the load to achieve perfect
is on.
:
countdown.
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
to set the appliance to
pause
until the indicator of the
set delay goes off.
Press again to start the
programme immediately.
.