Lithium Battery Warning; Cable Connections - SonicWALL 1RK52-110 Safety And Regulatory Information Manual

Minimum power cord rating for European Union (CE): Certified power supply cord not lighter than light
14
PVC sheathed flexible cord according to IEC 60227, designation, or H05 VV-F or H05 VVH2-F2, and rated
for at least 3G 0.75 mm².
The following statement applies only to rack-installed products that are GS-Marked: This equipment is
15
not intended for use at workplaces with visual display units, in accordance with §2 of the German
ordinance for workplaces with visual display units. To avoid incommoding reflections at visual display
workplaces this device must not be placed in the direct field of view.
This product is intended only for use in a restricted access area, it is not intended to be installed and
16
used in a home or public area accessible to the general population. When installed in schools, this
equipment must be installed in a secure location accessible only by trained personnel.
When shipped from the factory, this SonicWall product has a single power supply installed. A second
17
power supply can be ordered and installed for redundant power and added reliability. When the second
power supply is installed, both power cords must be removed to disconnect power from the unit.
Never remove or install a power supply with the power cord attached to the power supply being
18
removed or installed.
When using a Fiber Optic Small-Form Pluggable (SFP) module, ensure it is IEC 60825 certified and a
19
Class 1 Laser Product.
Suitable for installation in Information Technology Room in accordance with Article 645 of the National
20
Electrical Code and NFPA 75.

Lithium battery warning

The Lithium Battery used in the SonicWall security appliance may not be replaced by the user. Return the
SonicWall security appliance to a SonicWall-authorized service center for replacement with the same or
equivalent type recommended by the manufacturer. If, for any reason, the battery or SonicWall security
appliance must be disposed of, do so following the battery manufacturer's instructions.

Cable connections

All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or other wiring that exits the building where the
SonicWall appliance is located.
NOTE: Additional regulatory notifications and information for this product can be found online at
https://www.sonicwall.com/support.
SonicWall NSa 2700-3700
Safety and Regulatory Reference Guide
3