Language Settings; Universal Access Settings - Philips 6500 Series User Manual

Language settings

Menu language
1. While you watch TV, press
2. Select [Setup] > [TV settings] > [General
settings] > [Menu language].
3. Select a menu language from the list, then
press OK.
Audio language
If the TV channel broadcasts multiple or dual
audio languages, you can select your
preferred audio language.
1. While you watch TV, press
2. For digital channels, select [Audio
language]. For analog channels, select [Dual
I-II]. Press OK to confirm your selection.
3. Select from the available languages, then
press OK.
You can set your preferred primary and
secondary audio languages to hear when
available.
1. While you watch TV, press
2. Select [Setup] > [Channel settings] >
[Languages].
3. Select [Primary audio language] or
[Secondary audio language] and select from
the available languages.
4. Press OK to confirm.
Subtitles on analog channels
1. While you watch an analog TV channel,
press TEXT.
2. Enter the three-digit page number of the
subtitles page, which is usually '888'.
If available, subtitles are switched on.
Subtitles on digital channels
1. While you watch a digital TV channel,
OPTIONS.
press
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[Automatic], then press OK.
EN 42
.
OPTIONS.
.
Subtitle language
When available, you can change the subtitle
language for digital channels.
1. While you watch TV, press
2. Select [Subtitle language], then select
from the available languages and press OK.
The subtitle language is changed for the
specific channel.
You can set your preferred primary and
secondary subtitle languages to display when
available.
1. While you watch TV, press
2. Select [Setup] > [Channel settings] >
[Languages].
3. Select [Primary subtitle language] or
[Secondary subtitle language] and select
from the available languages.
4. Press OK to confirm.

Universal access settings

Switch on
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.
.
1. Press
2. Select [Setup] > [TV settings] > [General
settings].
3. Select [Universal access] > [On] or [Off],
then press OK.
Set audio feedback
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. While you watch TV, press
2. Select [Universal access] > [Key beep] >
[On], then press OK.
OPTIONS.
.
OPTIONS.