Sanyo Xacti VPC-S5 Instruction Manual page 34

CAPTURING IMAGES
NOTE
About the focus icon and target mark
i The target mark outlines the area that the camera is using to focus. If the
area outlined by the target mark is not the subject you want to focus on,
then refocus your subject, for example by changing the shooting angle.
i The target mark does not appear in the following situations.
When the subject is not in focus
When using the self-timer to take a picture (see page 37)
When the focus is set to focus range
When the Scene Select
i When the camera focuses on a wide area of the central part of the screen,
a large target mark appears.
If the motion alert icon appears...
i During still image shooting, if the shutter
speed is slow and the possibility that the
image may be blurred due to camera
movement becomes high, the motion
alert icon
monitor. In this case, use a tripod to
stabilize the camera when shooting, or
set the flash operation mode to
automatic (see page 34).
i When shooting with the scene selection
function set to the fireworks
the motion alert icon always appears,
but this is normal.
31
English
or
may appear on the LCD
or
function is enabled (see page 45)
Motion alert icon
mode,
(see page 52)