Acura NSX 2017 Manual page 82

Indicator Name
Turn Signal and
Hazard Warning
Indicators
High Beam
Indicator
Lights On Indicator
Immobilizer
System Indicator
On/Blinking
Blinks when you operate the turn
●
signal lever.
Blink if you press the hazard
●
warning button.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light
●
switch is on, or in AUTO when the
exterior lights are on.
Comes on briefly when you set
●
the power mode to ON, then goes
off.
Comes on if the immobilizer
●
system cannot recognize the key
information.
Explanation
Does not blink or blinks rapidly - Have
●
your vehicle checked by an authorized
Acura NSX dealer.
2 Replacing Light Bulbs P. 387, 388
—
If you set the power mode to VEHICLE OFF
●
(LOCK) while the exterior lights are on, a
chime sounds when the driver's door is
opened.
Blinks - You cannot start the power system.
●
Set the power mode to VEHICLE OFF
(LOCK), then select the ON mode again.
Repeatedly blinks - The system may be
●
malfunctioning. Have your vehicle checked
by an authorized Acura NSX dealer.
Do not attempt to alter this system or add
●
other devices to it. Electrical problems can
occur.
uuIndicatorsu
Message
—
—
—
—
Continued 81