Table of Contents
Advertisement
2.2.3. How to replace the Fuse
1. Remove the Fuse Cover with a screwdriver.
2. Replace the fuse and attach the Fuse cover.
3. SERVICE CAUTION
3.1. HOW TO DISCHARGE THE CAPACITOR ON FLASH C.B.A.
3.2. EEPROM DATA FOR SPARE PARTS OF THE MAIN C.B.A.
When the Main C.B.A. is replaced, the fixed and average data must be changed by Tatsujin kit
according to the Movie Camera's suffix.
Then, confirm and/or adjust the VTR and Camera section one by one.
3.3. SERVICE EXTENSION CABLES.
This models is required the following extension cables for all connections.
Note 1:
Use the following extension cables when checking or adjusting individual circuit boards except
module Parts.
5
Advertisement
Table of Contents
