Advertisement
Add/Delete/ or Change Mailboxes
1. Press M
ESSAGE
2. When prompted enter your security code
3. On the display you will see , press soft key below it
4. On display see M
5. On the display see C
6. The system will ask you to enter the mailbox... enter the box you want to add, delete or
change
7. At this point listen to the prompts to be guided through deleting the security code for the
box, or deleting the box.
NOTE: if there is no mailbox the system will say:
"there is no mailbox.. would you like to add one: press 1 for YES
8. Press S
PEAKER
NOTE: When you reset a security code for a mailbox, it will reset it back to system default
[previously provided by NATG]
key at System Admin phone (Usually extension 101)
.. press key
GR
... press key
HBOX
key when all done
North American Telecommunications Group
For Service: 604-856-9155 / service@natgtelecom.com
Page 4 of 5
Advertisement
