Table of Contents
Advertisement
The Display Power Saving Technology feature is enabled as the factory
default. If you want to turn off this feature, change it in the settings
accordingly in the Intel
Media Control Panel.
You can access this control panel in the following way:
1.
2.
3.
4.
If you want to enable this feature, click Enable under Display Power
Saving Technology.
Power Condition Descriptions
The computer operating capability and battery charge status are affected
by different power conditions, including whether an AC adaptor is
connected and what the charge level is.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing amber
Amber
White
No light
If the battery pack becomes too hot while it is being charged, the charge
stops and the DC IN/Battery indicator goes out. When the temperature of
the battery pack falls to a normal range, charging will resume. This process
occurs regardless of whether the computer's power is on or off.
Power indicator
Check the Power indicator to determine the power status of the computer.
The following indicator conditions should be noted:
White
User's Manual
®
Right-click on the desktop and click Graphics Properties...
Click Power and then select On battery in the upper-left corner.
Click Disable under Display Power Saving Technology.
Click Apply.
HD Graphics Control Panel/Intel
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates that the AC adaptor is connected and
the battery is charging.
Indicates that the AC adaptor is connected and
the battery is fully charged.
Under any other conditions, the indicator does
not light.
Indicates that power is being supplied to the
computer and the computer is turned on.
®
Graphics and
3-12
Advertisement
Table of Contents
