6.8.1 Auxiliary Functions...... 28 Table of Contents 6.8.2 Functions/Programmes Selec- 1 Safety Instructions ......ted by Pressing the Function Intended Use ........ Keys for 3 Seconds ....Safety of Children, Vulnerable Per- End Time ........30 sons and Pets ......6.10 Starting the Programme....
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
1 Safety Instructions This section includes the safety • The product must only be instructions necessary to pre- used for washing and rinsing vent the risk of personal injury or of laundry that are marked ac- material damage. cordingly • This appliance is intended to Our company shall not be held be used in household and responsible for damages that...
ing use of the appliance in a • Cut the power cable and the product safe way and the break and deactivate the lock- hazards involved. ing mechanism of the loading • Children under the age of 3 door before disposing of the should be kept away unless product for children’s safety.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical...
Page 7
• Place the product on a level be running from the tap in a and hard surface and balance minute in order for the product with the adjustable legs. to function properly. If the wa- • Connect the product to a ter pressure is above 1 MPa grounding plug protected by a (10 Bars), a pressure-reducing...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
charge hose is connected to • Do not use sharp or abrasive the tap. Do not touch the dis- tools to clean the product. Do charge water. not use household cleaners, • Take the following precautions soap, detergent, gas, gasol- to prevent formation of biofilm ine, thinner, alcohol, varnish, and malodours:...
2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manu- factured with high quality parts and materials which can be reused and are suitable for re- cycling.
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instructions” tion section first! • Place the product on a hard and level Your washing machine automatically floor. Do not place it onto a carpet with detects the amount of laundry high pile or other similar surfaces.
Tilt the machine back slightly. Rest the tabs NOTICE of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get dam- able, attach cover B and the Cap.
e. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water dis- charge issues may emerge. f. If the length of the hose is too short, use it by adding an original extension hose.
• Connection must comply with national 4.8 Start Up regulations. Before starting to use the product make sure • The electrical connection cable infrastruc- that the preparations described in section ture of the product must be adequate and “Environmental instructions” and “Installa- suitable for product requirements.
• Wash trousers and delicate laundry turned not open, apply the solutions provided for inside out. “Loading door cannot be opened” error in • Laundry that are subjected to materials the Troubleshooting section. such as flour, lime dust, milk powder, etc. 5.5 Correct Load Capacity intensely must be shaken off before pla- cing into the product.
Page 17
( ) a syphon piece in the softener compart- Only detergents, softeners and ad- ment, ditives suitable for washing ma- ) there is a liquid detergent apparatus for chines should be used. liquid detergent use in the main washing Do not use soap powder. compartment.
Using Anti-Limescale • When necessary, only use anti-limescale produced for washing machines. Using Bleach and Decolourants • Select a programme with pre-washing and add bleach at the start of pre-washing. Do not put detergent in the pre-wash com- partment. As an alternative application, se- Use of Gel and Tablet Detergents lect a programme with additional rinsing •...
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Auxiliary Function Indicators 3 12 Child Lock Enabled symbol...
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine.
• Synthetics Programmes are limited with the You can wash your laundry (such as shirts, highest spin speed appropriate for that particular type of fabric. blouses, synthetic/cotton blended fabrics etc.) in this programme. When the quick When selecting a programme, al- wash function button is pressed, the pro- ways consider the type of fabric, col- gramme duration will be shortened signific-...
Page 25
• SteamTherapy Allergy UK is the brand of the British Use this programme to reduce the creases Allergy Association. Seal of Approval is created to guide people that re- and ironing times of a small amount of un- spotted cotton, synthetic or mixed laundry. quire recommendation about a product that the related product re- •...
Page 26
• Xpress / Super Xpress selection. You can see stain groups that can be selected with the “Quick Wash” button. Use this programme to wash your lightly Depending on the selected stain group, a soiled or unspotted cotton clothes in a short special washing programme for which dura- time but not for towels or heavy cottons.
• Soft Toys If you scroll to cold wash option and Soft toys must be washed in a delicate pro- press Temperature Adjustment but- gramme due to their delicate fabrics, and the ton again, the recommended max- fibre and accessories they contain. Thanks imum temperature for the selected to its delicate washing movements and spin- programme appears on the display.
No change can be made in pro- When an auxiliary function button grammes where spin speed adjust- that cannot be selected with the cur- ment is not allowed. rent programme is pressed, the washing machine will make a warn- You can change the spin speed after the ing sound.
Do not use Quick Wash adjustment button 6.8.2 Functions/Programmes Se- when washing heavily soiled laundry for a lected by Pressing the Func- better washing performance. tion Keys for 3 Seconds Use the Quick Wash button for Mildly and Lightly soiled laundry and shorten the pro- •...
To activate bluetooth connection: • Extra Rinsing Press and hold Remote Control function but- This function can be selected by pressing ton for 3 seconds. Countdown “3-2-1” will and holding the related auxiliary function but- be displayed, and then Bluetooth icon will ton for 3 seconds.
d. Press Start / Pause. Time countdown After a certain period when the end starts. time function is activated, the ma- chine switches to stand-by mode Additional laundry can be added into and some LEDs on the display are the machine during the End Time turned off.
If the Remote Control Function is se- lected, the door will be locked. In or- der to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. Opening the loading door in case of power failure: 6.12 Changing the Selections After In case of power failure, you can use...
Switching the machine to pause mode: If you turn the programme selection Press the Start/Pause button to switch the knob when the Child Lock is en- machine to pause mode. Pause symbol will abled, the programme will not be flash on the display. cancelled.
You can touch the “Appliances” tab in the PLIANCE” (touch here for setting up a HomeWhiz application to view appliances new appliance) button in the upper right paired with your account. Following the in- corner. Perform the setup by following stallation of the application, HomeWhiz func- both the steps below and the steps in the tion enables the washing machine to send...
6.15.2 Setting up a Washing Ma- If you cannot successfully perform chine Connected to the setup within 5 minutes, your washing machine will turn off auto- Someone Else's Account matically In this case, you will have If the washing machine that you want to use to start over the setup procedure.
If the Remote Control function is off, all oper- If the Bluetooth connection is turned ations are performed over the machine, only on in your product, then the Remote the performance of status follow-up is al- Control function can be selected. lowed over the application.
After every washing make sure that no for- 7.1 Cleaning the Detergent Drawer eign substance is left in the product. Clean the detergent drawer at regular inter- If the holes on the door gasket shown in the vals (once every 4 to 5 wash) as mentioned figure is blocked, open the holes using a below to prevent accumulation of powder toothpick.
propriate brush. If the filters are too dirty, Temperature of the water inside the remove them from their places with a pli- product may rise up to 90 ºC. To ers and clean in this way. avoid the risk of scalding, clean the filter after the water inside the c.
8 Troubleshooting • A hard substance has entered into the Please read the “Safety Instructions” pump filter. >>> Clean the pump filter. section first! • Transportation safety bolts are not re- moved. >>> Remove the transportation Programmes do not start after the load- safety bolts.
Page 40
• Loading door may be stuck because of • Timer may stop during spinning step. >>> the pressure it is subjected to. >>> Grab Automatic unbalanced load detection sys- the handle and push and pull the loading tem is activated due to the unbalanced door to release and open it.
Page 41
Washing performance is poor: Stains • A higher temperature was selected. >>> persist or the laundry is not whitened. Select the proper programme and temper- (**) ature according to the type and soiling de- gree of the laundry. • Insufficient amount of detergent is used. >>>...
Page 42
step. Wash and clean the drawer with hot • Some meshed laundry such as tulle may water. Put the detergent in the correct foam too much because of their texture. compartment. >>> Use smaller amounts of detergent for • Detergent was mixed with the softener. this type of item.
, might give raise to safety is- to the instructions and spare parts list of this sues not attributable to Beko , and will void product by the manufacturer according to the warranty of the product.