Table of Contents
Advertisement
Doing more with your camera
Press Menu,
, and OK to access
settings
AF Control (Still)
Choose an auto-focus setting.
White Balance
Choose your lighting
condition. (Available in Auto
mode.)
Exposure Metering
Evaluate light levels at specific
areas of a scene.
AF Zone
Select a large or concentrated
area of focus.
24
,
Picture-taking Options
IMPORTANT: Your camera offers a built-in Help system.
Continuous AF—because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
Auto—automatically corrects white balance. Ideal for general
picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
Multi-Pattern—evaluates lighting conditions throughout
the image to give an optimum picture exposure. Ideal for
general picture taking.
Center-Weight—evaluates the lighting conditions of the
subject centered in the lens. Ideal for backlit subjects.
Center-Spot—similar to Center-weight, except the metering
is concentrated on a smaller area of the subject centered in the
LCD.
Multi-Zone—evaluates 5 zones to give an even picture
focus. Ideal for general picture taking.
Center-Zone—evaluates the small area centered in the lens.
Ideal when you need precise focus.
See page
40.
www.kodak.com/go/support
Advertisement
Table of Contents
