Positioning Projector; Lens Installation - Sanyo PLC-XP46 Owner's Manual

This projector is designed to project on a flat
projection surface.
Projector can be focused from 4.6' (1.4m) ~ 48.3'
(14.7m).
Refer to figure below to adjust screen size.
Max. Zoom
Screen
Size
Min. Zoom
Distance
4.6' (1.4m)
LENS SHIFT ADJUSTMENT
Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to
provide projected image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below.). Refer
to P 20 for operation.
Highest (10 : 0)
LENS INSTALLATION (For Lensless model PLC-XP46L only)
Before setting up a projector, install Projection Lens on
Projector.
1. Before installation, check where a projector is used and
prepare suitable lens. For specifications of a Projection Lens,
contact sales dealer where you purchased a projector.
2. For installation, refer to installation manual in the optional
lens.
NOTE;
When install the lens, remove the cover cap in the projector.

POSITIONING PROJECTOR

11.8'(3.6m)
4.6'(1.4m)
100"
40"
77"
31"
40" 100" 150"
31" 77"
115"
11.8' (3.6m) 17.7' (5.4m)
10 : 0
ROOM LIGHT
Brightness in room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide best
image.
36.1'(11.0m)
24.0'(7.3m)
300"
200"
231"
154"
200" 250"
154" 192"
24.0' (7.3m) 30.2' (9.2m)
Lowest (1 : 1)
COVER CAP
PREPARATION
48.3'(14.7m)
400"
Max. Zoom
308"
Min. Zoom
300" 400"
231" 308"
36.1' (11.0m) 48.3' (14.7m)
1
1
9