Toro Groundsmaster 4010 Operator's Manual page 24

Mow Speed
Trans Speed
Smart Power
*Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced."
Titles will be in the selected language, but menu items
are in English.
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are 4 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle time delay, maximum mowing ground speed,
maximum transport ground speed, and Smart Power.
These settings are in the Protected Menu.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the
code, contact your Authorized Toro Distributor for
assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
Controls the maximum speed
while in mow (low range)
Controls the maximum speed
while in transport (high range)
Smart Power prevents
bogging down in heavy turf by
automatically controlling the
machine speed and optimizing
cutting performance.
Description
Lists the model number of the
machine
Lists the serial number of the
machine
Lists the software revision of
the master controller
Lists the software revision of
the InfoCenter
Lists the machine
communication bus status
, use the center button to
ENU
M and press the
ETTINGS ENU
10).
2. In the S
ETTINGS
scroll down to the P
the right button
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 11B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 11D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
24
Figure 10
M , use the center button to
ENU
M and press
ROTECTED ENU
(Figure 11A).
Figure 11
Figure 11C). Repeat this step
g028523
g028522