Image (Video Mode) - Sanyo PLC-WXU10 Owner's Manual

Image (Video Mode)

Aspect
Use this function to choose your desired image size.
4 : 3 : Change the original aspect 1:1 to 4:3 at the composite video input
or S-video input.
1 TO 1 : Keep the image with original width-height ratio at the component input.
FILL ALL : The input source will be scaled to fit the projection screen.
ANAMORPHIC : Maintain the original aspect ratio in the center of the output image
and place the majority of the distortion towards the horizontal edges
of the image.
ANAMORPHIC (Video only)
1280 X 800
16:9
Freeze
Choose "ON" to freeze the screen image.
Choose "OFF" to unfreeze the screen image.
EN-28
No matter what input signal is, out
put aspect ratio is 16:9 and fit to the
whole screen.