Control Unit; Charging Status; Driver Display - Volvo V60 TWIN ENGINE 2019 Quick Manual

Hide thumbs Also See for V60 TWIN ENGINE 2019:
Table of Contents

Advertisement

02

CHARGING STATUS

The car's charging status can be checked at the charging input
socket, on the control unit, in the driver display and in Volvo On
Call* app.
Lamps for the charging input socket
White - LED light.
Yellow - Waiting mode, waiting for the charging to start.
Blue – timer set.
Flashing green - Charging in progress.
Green constant glow - Charging complete, extinguishes after a
while.
Red constant glow - A fault has occurred.

Control unit

Both LEDs flash blue, yellow and red: Self-test – wait until the
self-test is complete.
One LED shines or flashes blue while the other LED is off:
Standby.
Both LEDs flash blue: Charging in progress.
One LED shines or flashes yellow while the other LED is off:
Charging is in progress or charging is not possible – temperature
monitoring error. Restart charging.
One LED shines or flashes red while the other LED is off: Charg-
ing is not possible – the earth fault switch has tripped. Restart
charging.
One LED flashes red while the other shines red: Charging is not
possible – the charging cable is connected to an unearthed
socket. Connect to an earthed socket.
Both LEDs flash red: Charging is not possible – internal error.

Driver display

The different colours of the symbol indicate charging status.
Blue light - charging in progress.
Green light - the battery is fully charged.
Red light - charging error, check the connection of the
charging cable with the car and the 230 V socket.

Advertisement

Table of Contents
loading

Table of Contents