KTM 250 EXC SIX DAYS 2023 Setup Instructions page 13

(All EXC models)
–
Remove connector
signal wiring harness.
S03672-10
–
Insert the black and violet cables of the bulb included in
the separate enclosure into the socket and position it in
the turn signal indicator lamp.
S03673-01
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
–
Join plug-in connector
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
S03677-10
–
Connect plug-in connector
–
Secure turn signal relay
the connector.
–
Install the headlight mask with the headlight. (
–
Remove the air filter box cover. (
–
Remove the rear left side cover. (
6
from the bracket and join with turn
7
of the left turn signal using the
8
of the right turn signal using
9
of the headlight.
bk
of the turn signal switch.
bl
with a cable tie and plug in
p. 32)
p. 33)
SETUP 2
p. 35)
11