Belkin F9K1002V4 User Manual page 43

TROUBLESHOOTING, SUPPORT, AND WARRANTY
I am having difficulty setting up Wired Equivalent
Privacy (WEP) security on my Router.
1. Log in to your Router. Visit http://router/
Click on the "Login" button in the top right-hand corner of the
screen. You will be asked to enter your password. If you have never
set a password, leave the "Password" field blank and click "Submit".
2. Click "Wireless" in the left-hand menu. Then
click "Security" just below that.
3. Select the "128-bit WEP" option.
4. You may type in a WEP key manually, or generate one from
a passphrase. Type a phrase in the "Passphrase" field and
click the "Generate" button. A WEP key is composed of 26
hexadecimal digits (0–9, A–F.. For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.
5. Click "Apply Changes" to finish. Your wireless
activity is now encrypted. Each computer using your
wireless network will need to use the new key.
with your web browser.
Note: If you are configuring the Router over a wireless
connection, you will have to re-connect to the
Router after changing any security settings.
Note: Some older networking hardware supports
only 64-bit WEP encryption. If your older computers
cannot connect to your network, try 64-bit WEP.
41