Table of Contents
Advertisement
Settings
Table continued from last page
Settings
4.
Display settings
5.
Feedback sound
6.
Buzzer volume
7.
Rinse aid
8.
Super rinse
9.
Water save
26
Options
Contrast top
display1/2/3/4
Logo in top display On/Off
Info in front display1/2
0/1/2/3
0/1/2/3
0/1/2/3/4/5
On/Off
On/Off
For adjusting the contrast of the top display.
Setting to hide the logo shown on the
display.
You can choose what information you wish
to display.
1
Status indicator
Time remaining
Off
2
Status indicator
Time left+Status
On
This sound is used to confirm each button
press.
The buzzer indicates when a dishwashing
program has ended.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Increase the rinse aid dosage:
•
If the dishes have water marks.
Decrease the rinse aid dosage:
•
If the dishes have a sticky white/blue
film.
•
If the dishes are streaked.
•
Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
Super rinse adds two extra rinses.
Activated in the following programs:
Heavy
Eco
Flexi
Plastic
Upper half
Lower half
Built-in water tank.
Before deactivating the water tank, run a
self-cleaning programme. See Self-cleaning
in the chapter Using the dishwasher.
Advertisement
Table of Contents
