Huawei MatePad Air User Manual page 63

To adjust focus and metering separately, touch and hold the viewfinder and drag the
respective frame or ring to the desired location.
Adjust brightness: Touch the viewfinder. When the
•
focus frame, drag it up or down.
Zoom in or out: On the viewfinder, pinch in or out, or drag the zoom slider.
•
Select a camera mode: Swipe up, down, left, or right across the camera mode options.
•
Turn the flash on or off: Touch
•
(Always on).
If you select
environment, a flash icon will appear in the viewfinder and the flash will be
automatically turned on when you take a photo.
These features may not be available in some camera modes.
3
Touch the shutter button to take a photo.
Use the Floating Shutter to Take Photos
You can enable the floating shutter to display it in the camera viewfinder, and drag it
anywhere you like to take photos quickly.
1
Go to Camera >
2
The floating shutter will then be displayed in the viewfinder. You can drag it anywhere you
like.
3
Touch the floating shutter to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1
Open Camera, select Photo mode, and make sure the rear camera is in use.
2
Press and hold the shutter button or one of the Volume buttons to take burst photos.
When shooting, you'll see a number in the viewfinder, which indicates how many photos
you've taken so far.
Burst shooting via Volume button pressing is only supported on certain tablet models.
3
Release your finger to stop shooting.
Select the Burst Photos You Want to Keep
1
Open Gallery. Touch a burst photo (which is tagged with
and select
(Auto) and the camera detects that you are in a dimly lit
and enable Floating shutter.
Camera and Gallery
symbol appears next to the
(Auto), (On),
), then touch
(Off), or
.
60