Alarm Mode - Sangean ProTravel PT-50 Operating Instructions Manual

02 Yacht Boy 50, GB
OPERATION

Alarm mode

19.08.2003 14:27 Uhr
____________________________________________________________
Stereo/mono reception (with earphones only)
If the signal from the FM stereo station is weak, you can improve the sound
quality by switching to mono reception.
Press »MONO/STEREO« (on the right of the device) to switch to mono.
1
– Display: » « disappears from the display.
2 Press »MONO/STEREO« (on the right of the device) to switch to stereo.
– Display: » «, if a stereo station is being received.
Displaying the alarm time
1 Press »ALARM SET« briefly.
– Display: the set alarm time.
Alarm with radio station
1 Press »ON/OFF SLEEP« to switch on the device.
Press »SW 1 ... 7 MW
2
Tune in a radio station using »TUNING« (on the right side of the device).
3
Adjust the alarm volume using
4
Seite 33
FM« (on the top of the device) to select the wave band.
}
»VOLUME « (on the left side of the device).
12