Flash Utility - DEC DIGITAL PC 3010 System Reference Manual

4. Select the item(s) you wish to change and use the [+] or [-] as follows:
Field
Floppy check
Summary screen
Quiet boot
5. Press [Esc] twice then [Enter] twice to exit the BIOS Setup utility and to
reboot the computer so changes immediately take effect.

Flash Utility

All computers have BIOS software in a read-only, non-volatile memory (ROM)
chip. This BIOS initializes hardware and boots the operating system when the
computer is turned on. The BIOS also provides access to other services such
as keyboard and disk drives.
Your computer comes equipped with flash memory. This means that you can
restore your computer's BIOS simply by running the flash utility. If necessary,
you can also upgrade your computer's BIOS to future releases by running the
flash utility along with any flash BIOS update diskette.
Only use the flash utility to upgrade your computer's BIOS if you are instructed
to do so by an authorized DIGITAL support representative. You can download
BIOS updates along with the flash utility and instructions on how to flash your
computer's BIOS from the Internet or DIGITAL's Bulletin Board Service (BBS).
Refer to the "Preface" for additional access information.
Speed Up Boot Selection
Disable
Disable
Disable
Using the BIOS Setup Utility
2-17