Checking The Battery; Window Washer Fluid; Changing Wiper Blades - Honda Accord Coupe 2017 Owner's Manual

Hide thumbs Also See for Accord Coupe 2017:
Table of Contents

Advertisement

MAINTENANCE

Checking the Battery

Check the battery terminals for corrosion monthly.
The battery condition is monitored by a sensor on
the negative terminal. If there is a problem with the
sensor, a message on the information display*/multi-
information display* appears. Have your vehicle
checked by a dealer.
WARNING
The battery gives off explosive hydrogen gas during normal operation.
A spark or flame can cause the battery to explode with enough force to kill or
seriously hurt you.
When conducting any battery maintenance, wear protective clothing and a
face shield, or have a skilled technician do it.
WARNING: Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash your hands after handling.

Window Washer Fluid

If the washer fluid level is low, fill the washer reservoir.
Pour the washer fluid carefully. Do not overflow the
reservoir.
Canadian models
If the washer fluid level is low, the washer level
indicator or a message appears on the multi-information
display.
NOTICE
Do not use engine antifreeze or a vinegar/water solution in the windshield washer
reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution
can damage the windshield washer pump.
140 |

Changing Wiper Blades

If the wiper blades leave streaks across the windshield, try cleaning them first with a
paper towel or soft cloth and wiper fluid. If the wiper blade rubber has deteriorated,
you should change the wiper blades.
1. Lift the driver side wiper arm first, then the
passenger side.
2. Press and hold the tab, then slide the holder from
the wiper arm.
3. Slide the wiper blade out from its holder by pulling
the tabbed end out.
4. remove the retainers from the rubber blade that
has been removed, and mount to a new rubber
blade. Correctly align the rubber protrusion and the
retainer grooves.
5. Slide the new wiper blade onto the holder from the
bottom end. The tab on the holder should fit in the
indent of the wiper blade.
6. Slide the wiper holder onto the wiper arm, then
push down the lock tab.
7. Lower the passenger side wiper arm first, then the
driver side.
NOTICE
Avoid dropping the wiper arm, as it may damage the windshield.
*if equipped
MAINTENANCE
Tab
Blade
end cap at
the bottom
Top
Retainer
Blade
Holder
Indent
Holder
Tab
Cap
| 141

Advertisement

Table of Contents
loading

Table of Contents