Husqvarna MARK III 540XP Operator's Manual page 239

efficient use by cutting narrow cuts. Both guide bar and
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
5/32 in /
S93G
4.0 mm
5/32 in /
SP21G
4.0 mm
1679 - 006 -
587 80 0.025 in /
90-01 0.65 mm
595 00 0.025 in /
47-01 0.65 mm
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain.
A Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
30° 60°
30° 60°
21 0°
21 0°
587 80
67-01
595 00
46-01
239