Demo Function; Setting The Clock - Samsung MM-B100 Instruction Manual

Demo function

GB
You can view the various functions available on your system.
1
Press the Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
2
To cancel this function, press Demo again.
10
Function Demo VOL.+
Mode
VOL.–
S.Bass

Setting the Clock

Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Program/Set.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
1
EQ/S.Bass
REV.
CD SYNC.
Mode
3,5,7
Repeat
Program/
Set
4,6
Mono/ST
.
Press...
Press...
Timer Timer/
Clock
On/Off
2
Sleep AUX
TAPE
RDS
Display
PTY
CD
+10
Band
VOL.
Tuning
Mode
4,6
VOL.
Mute