Installing The Side Discharge Chute; Removing The Side Discharge Chute - Toro Super Recycler 20797 Operator's Manual

Figure 26
1. Discharge deflector
Figure 27
1. Lever
Note: To unlock the plug, rotate the lever on the plug
to the right (Figure 19).
2. Rear discharge plug
2. Tabs
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.

Installing the Side Discharge Chute

1. Unlock the side discharge door (Figure 28).
2. Lift open the side discharge door (Figure 29).
3. Install the side discharge chute and close the door
onto the chute (Figure 30).

Removing the Side Discharge Chute

To remove the side discharge chute, reverse the steps
above.
Important: Lock the side discharge door after you
close it (Figure 31).
12
Figure 28
Figure 29
Figure 30