Assembling And Preparing - LG PB56 Series Owner's Manual

NOTE
y Image shown may differ from your TV.
y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y The available menus and options may differ from the input source or product model that you
are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the manufacturer's
warranty.
y Some models have a thin film attached on to the screen and this must not be removed.
Remote control,
batteries (AAA)
Stand Screws
3 EA, M5 x L25
Stand Body / Stand Base
ASSEMBLING AND PREPARING
Owner's manual
Stand Screws
4 EA, M4 x L14
Stand Sticker
(Depending on model)
Ferrite core
(Depending on model)
Power Cord
9