Preparation Before Using Your Unit - Samsung yePP MCD-SM60 Instruction Manual

Portable mp3-cd player mp3-cd/cd-r/rw playback
Hide thumbs Also See for yePP MCD-SM60:
Table of Contents

Advertisement

Preparation before
using your unit
Using the AC adapter
1
Connect the AC adaptor to the power
input jack. Then, connect the AC plug
of the adaptor to the AC outlet.
• Only use the AC adaptor supplied
with your product.
When you are not using this product,
disconnect the AC adaptor from the AC outlet.
2
Connect the headphone jack
plug to the main unit.
Connection to External Device (if necessary)
* Your CD Player may be connected to the AUX IN jack of an external device
1. Reduce the volume of the external device
2. Connect the Line Out jack to the Input jack of the device with
connection cable (not supplied).
9
(not supplied)
Using rechargeable batteries
1
Strip the sheath covering the
terminals of the rechargeable battery
before charging it.
•As shown in the illustration, carefully strip the
sheath of the negative (-) terminal by 6 mm.
If the sheath is not stripped, charging will not function.
2
Insert the batteries into the
batteries compartment.
•Carefully check the correct orientation of
the positive and negative terminals of the
battery.
3
Connect the AC adaptor to the
AC outlet and power input jack.
•Charging of the rechargeable batteries
will commence.
Note
Time taken to fully charge the battery : 10 hours
Battery life of fully charged battery
MP3-CD : 10 hours, 30 minutes max.
CD : 12 hours max.
(not supplied)
6mm
Sheath to be stripped
10

Advertisement

Table of Contents
loading

Table of Contents