Table of Contents
Advertisement
DVD-K305W-GB
2004.4.12
Playing DVD-OK Discs
GB
You can enjoy the feeling of a karaoke bar in the comfort of your
home. Watch the video and sing along the lyrics displayed on the TV
screen against the accompaniment.
1
Use the NUMERIC buttons (0-9)
to enter the numeric of the song
you want to play.
2
Press the PLAY/PAUSE(
button or the ENTER button.
The numeric and title of the song will
be displayed and the accompaniment
starts.
To Clear Incorrectly Entered Song Numeric
Press the CANCEL button.
To Stop During Accompaniment
Press the STOP button.
23
10:19 AM
Page 24
)
Can't fight the moonlight
Singer : Leahn limes
Microphone Operation
1
Insert alkaline batteries (1.5VX3) in the power part of
microphone.
2
Approve the power to the microphone and set same channel for
microphone and main unit before use (refer to channel setup
table).
To adjust the channel of microphone, open the channel cover
using tweezers.
To adjust the channel of main unit, open the channel cover
using screwdriver.
3
When you turn on the power switch of microphone after setting
the channel, LED will light and the microphone is ready to use.
4
If you do not use microphone, turn off the power switch.
LED will turn off and the microphone cannot be used.
Channel Setup Table
Dip Switch NO.
1
2
3
ON
OFF
OFF
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
OFF
Cautions for Use
1. Make sure to set the same channel for main unit.
Main unit and microphone should have same channels to
enable transmission and reception between them.
2. Use alkaline battery for power as much s possible.
Ordinary battery may cause shorter service life of microphone
and main unit and may deteriorate the performance.
3. Make sure to turn off the power switch before inserting the
batteries, and check the polarity (+)(-) of battery when
inserting the battery.
4. If you drop the battery in the water accidentally during use,
immediately turn off the power switch and contact the
A/S center.
5. RF noise may occur in the area near railroad, power line and
big motor where high voltage runs and EMI noise occurs.
6. Since the internal parts of device are manufactured precisely,
do not disassemble it as you want.
7. Make sure to remove and keep the batteries in safe place,
if you do not use it for long period of time.
Channel NO.
4
OFF
Ch1
OFF
Ch2
OFF
Ch3
OFF
Ch4
OFF
Ch5
OFF
Ch6
OFF
Ch7
ON
Ch8
ON
Ch9
ON
Ch10
Advertisement
Table of Contents
