Table of Contents
Advertisement
ENGLISH
Specification
Power Consumption
y Refer to the main label.
AC adapter
y Model : DA-50F25
y Manufacturer : Asian Power Devices Inc.
y Input : 100 - 240 V ~ 50 - 60 Hz
y Output : 25 V 0 2 A
y Model : MS-Z2000R250-050D0-P
y Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO.,
LTD.
y Input : 100 - 240 V ~ 50/60 Hz
y Output : 25 V 0 2 A
Dimensions (W x H x D): Approx. 890.0 mm x 65.0 mm x 119.0
mm (35.0 inch x 2.6 inch x 4.7 inch)
Bus Power Supply (USB): 5 V
Amplifier (Total RMS Output power): 380 W RMS
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses that have the obligations to disclose source code,
that is contained in this product, and to access all referred license
terms, copyright notices and other relevant documents please
visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a
period of three years after our last shipment of this product.
FCC Compliance Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and the
receiver.
y Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may
cause undesired operation. Any changes or modifications in
construction of this device which are not expressly approved
by the party responsible for compliance could void the user' s
authority to operate the equipment.
S75Q.DUSALLK_SIMPLE_MFL71879802.indd 4
0
500 mA
FCC RF Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with minimum
distance 20 cm (7.8 inches) between the antenna and your
body. Users must follow the specific operating instructions for
satisfying RF exposure compliance.
FCC Radio Frequency Interference Requirements:
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and/or damage this device. This device
cannot be co-located with any other transmitter.
Supplier's Declaration of Conformity
Trade Name
LG
Responsible Party
LG Electronics USA, Inc.
Address
111 Sylvan Avenue, North Building
Englewood Cliffs, New Jersey 07632
Email
lg.environmental@lge.com
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product' s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING:
y TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
y Do not install this equipment in a confined space such as a
book case or similar unit.
CAUTION:
y Do not use high voltage products around this product. (ex.
Electrical swatter) This product may malfunction due to
electrical shock.
y No naked flame sources, such as lighted candles, should be
placed on the apparatus.
y Do not block any ventilation openings. Install in accordance
with the manufacturer' s instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from over heating. The openings should never be blocked by
placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer' s instruction has been adhered to.
y The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
y The apparatus should not be exposed to water (dripping or
splashing) and no objects filled with liquids, such as vases,
should be placed on the apparatus.
2022-02-09
8:36:50
Advertisement
Table of Contents
