Compressor Specifications - U-Line UHNB115-IS01A User Manual & Service Manual

USER GUIDE

Compressor Specifications

MODELS MANUFACTURED BEFORE 2020 WITH
R134a REFRIGERANT
DANGER
!
Electrocution can cause death or serious injury.
Burns from hot or cold surfaces can cause serious
injury. Take precautions when servicing this unit.
Disconnect the power source.
Do not stand in standing water when working
around electrical appliances.
Make sure the surfaces you touch are not hot or
frozen.
Do not touch a bare circuit board unless you
are wearing an anti-static wrist strap that is
grounded to an electrical ground or grounded
water pipe.
Handle circuit boards carefully and avoid touching
components.
To measure the start winding resistance, measure across
the C and S pins.
To measure the run winding resistance, measure across the
C and R pins.
Also check S to R and you should get the sum of the run
and start windings.
To ensure the windings are not shorted, check the S and R
to ground.
Compressor Specifications
OVERLOAD PROTECTOR
RELAY COVER
Refrigerant
Voltage
Frequency
Run Cap
Start Winding
Run Winding
LRA
FLA
Starting Device
Overload
* All resistance readings are ±10%
49
R S
C
STARTING RELAY
ULIN_0576_AW
EMU30HSC
R134a
115 VAC
60 Hz
12μF/180 VAC
7.0 Ohm at 77°F
8.4 Ohm at 77°F
5.5 A
1.0 A
8EA14C
4TM197NFBYY-53