GMC Yukon Denali 2014 Owner's Manual page 12

1-6 In Brief
Manual Liftgate Operation
To unlock the liftgate, press
the power door lock switch or press
on the Remote Keyless Entry
(RKE) transmitter twice. See
Remote Keyless Entry (RKE)
System Operation on page 2-2.
Press the touch pad on the
underside of the liftgate handle (B)
and lift up.
Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This
will cause the liftgate to be
unlatched.
Power Liftgate Operation
On vehicles with a power liftgate,
the switch is on the overhead
console.
The vehicle must be in P (Park) to
use the power feature. The taillamps
will flash and a chime will sound
when the power liftgate moves.
There are several ways to open and
close the power liftgate:
on
Press and hold
transmitter until the liftgate starts
moving.
8
Press
console.
Press
liftgate next to the latch to close.
Pressing a second time while the
liftgate is moving reverses the
direction.
To disable the power liftgate
function, press OFF on the liftgate
switch. See Liftgate on page 2-8.
Liftglass
If equipped, there are two ways to
open the liftglass:
Press the button on the
underside of the license plate
applique (A).
Press
transmitter.
8
on the RKE
on the overhead
on the bottom of the
on the RKE
Windows
The driver door has switches that
control all windows; the passenger
door switch only controls that
window. The power windows work
when the ignition is in ON/RUN or
ACC/ACCESSORY, or in Retained
Accessory Power (RAP). See
Retained Accessory Power (RAP)
on page 9-24.
Press the switch to lower the
window. Pull the switch up to raise
it. See Windows on page 2-18 and
Power Windows on page 2-18.