5
Wait for 5 seconds and then replace the jumper plug in its original location.
6
Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1
Replace the
front
2
Replace the
computer
Clearing CMOS Settings
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
bezel.
cover.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
75