Toshiba MMY-MUP0721HT6P-UL Owner's Manual page 11

■
Changing the operation mode
NOTE
Operation modes that cannot be set are not shown, according to the model of indoor unit.
■
Changing the fan speed
NOTE
• When the operation mode is "Fan", you cannot select "Auto".
• The fan speed that can be set varies depending on the indoor unit connected.
• " " is displayed when combined with an indoor unit that cannot do "Fan Speed".
19-EN
1140602001_EN FR ES.indb 10 1140602001_EN FR ES.indb 10
1
Push [ ] and [ ] to switch to the
"Mode" screen
2
Push [ ] and [ ] to select an operation
mode
Heat Dry
Fan Cool
1
Push [ ] and [ ] to switch to the "Fan
Speed" screen
2
Push [ ] and [ ] to select fan speed
Auto
High
Medium +
Medium
Low +
Low
■
Changing the wind direction
• If the connected indoor units have louvers, then the horizontal louver icon is displayed on the air conditioner main
screen.
• If the connected indoor units have vertical louvers, then the vertical louver icon is displayed on the air conditioner
main screen.
* For models that have only left-right directional louvers, they are operated as horizontal louvers on the remote
control.
Up / down direction: Horizontal louvers
* Display while swinging
Left / right direction: Vertical louvers
* Display while swinging
– 10 –
1
Push [ ] and [ ] to switch to the "Wind
direction" screen (horizontal louvers)
2
Push [ ] and [ ] to select wind
direction
(1) (2) (3) (4) (5) Swing
Operation mode Settable angles
(1), (2), (3), (4), (5),
Heat, Fan
Swing
Cool, Dry (1), (2), (3), Swing
1
Push [ ] and [ ] to switch to the "Wind
direction" screen (vertical louvers)
2
Push [ ] and [ ] to select wind
direction
(1) (2) (3) (4)
(5) (6) (7) Swing
4/22/23 4:50 PM 4/22/23 4:50 PM
EN
FR
ES
20-EN