Dyson Pure Cool me BP01 User Manual page 5

Changing your filter
To always get the best performance from your
Dyson personal purifying fan, it is important to
regularly clean it and check for blockages.
Do not use your machine without the filter in place.
1
Push the side buttons at the same
time to release the ball.
Looking after your machine
clik clik
To always get the best performance from your Dyson
personal purifying fan, it is important to regularly clean
it and check for blockages.
Cleaning your Dyson personal purifying fan
Regular clean
Brush the outside of your machine with a soft
brush to remove any debris from the mesh.
Use a soft, dry, lint-free cloth to clean the ball
and dome.
2
Lift out your old filter using its tabs.
clik clik clik clik
Deep clean
When changing your filter, give your machine
a thorough clean.
With the filter removed, use a Dyson's Flexi crevice
tool (or long-handled, clean, paintbrush) to
remove any debris from the base of the machine.
3
Insert your new filter.
clik clik
Error codes
If your machine shows an error code, try turning
it off and then on again. If this does not clear the
error code contact Dyson Customer Care.
4
4
clik clik
click click
Firmly push the ball back into
position, making sure it clicks
securely into place.