Preparations
Installation
Attaching the Stand
"
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
"
Disassembly is the reverse order of assembly.
1
As shown in the figure, remove the product and foam
cushion, and then place the product on the table with its
front side facing the floor.
4
3
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
6
4
Stand up the monitor as shown in the figure.
Hold the lower corners or edges of the product
●
when moving it.
Do not directly apply pressure on the screen.
●
Do not hold the screen when moving the product.
●
Do not hold the product upside down only by the
●
stand.
x 3
x 4
2
1
Put the stand base onto the
stand neck as the direction
shown in the figure. Check
that the stand neck is
firmly connected.
5
Tightly fasten the connecting screw at the bottom of the
main body.
7
4
Stand assembly is complete.
- 9 -
3
Tightly fasten the
connecting screw at the
bottom of the stand base.