Sony DCM -M 1 Operating Instructions Manual page 60

Checking t he t rack inf orm at ion
Labelling t he t rack
You can label a track using up to 100 characters.
(1) Touch the track name box on the track information display.
(2) Input characters (p. 80).
Note
You can record up to 100 characters in one track, and 5000 characters in one disc.
You cannot label the track if:
•the disc is protected.
•the track is protected ( is in the PROTECT box).
M arking a t rack
Mark the tracks which you want to distinguish from others. If you select "MARK" in
"SORT" in the PLAY menu, those marked tracks are displayed together at the top of the
index display.
(1) Touch the MARK box in the track information display to indicate
To cancel t he m ark set t ing
Touch the MARK box again to erase .
You cannot mark the track if:
•the disc is protected.
•the track is protected ( is in the PROTECT box).
To mark using the Remote Commander
Select the desired track on the index display, then press MARK on the Remote
Commander.
To m ark t racks during playback
(1) Press MARK on the Remote Commander while playing back the track.
(2) Select YES using B /b , then press ENTER.
To cancel t he m ark set t ing
Press MARK again during playback.
60
Downloaded from:
icon will be displayed on the marked tracks.
TRACK INFORMATION
0002 01:23
12.24.1999 1:30
PM
MARK
8.00
PROTECT DATA RATE
Mbps
CLOSE
The track is played back repeatedly and the confirmation message appears.
https://www.usersmanualguide.com/
.