DeWalt DXV20PTA Original Instructions Manual page 23

English
PROBLEM
Check power cord, plugs and outlet.
Motor does not run
Ensure the on/off switch is in the
ON position ( I )
Remove blockages in the oor
nozzle, extension wands, hose
or lter.
Replace the disposable dust bag.
Suction capacity
Check for proper installation of
decreases
the lter.
Clean or replace the lter.
Empty dust tank, refer to TO EMPTY
THE TANK under OPERATING
INSTRUCTIONS.
Thermal overload has been tripped:
1. Turn the vacuum off and
2. Empty the dust tank, if needed.
Vacuum stops
3. Allow the unit to cool.
running
4. Plug the power cord into an
Check for proper installation of the
Ensure lters are not damaged;
Dust comes out
replace if necessary.
while vacuuming
Ensure lter seals are in place and
are secure.
Check the t of the vacuum head.
WARNING:
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or a similarly
quali ed person in order to avoid a hazard.
WARNING:
This product is NOT to be used for ltering of
pathogens, for example COVID-19. Follow all local,
state and federal guidance on general cleaning
practices.
SOLUTION
disconnect vacuum cleaner from
power source.
appropriate outlet and turn on/off
switch to the ON position ( I ) to
test.
lters.
TOOL GUARANTEE
3
YEAR
LIMITED
GUARANTEE
22