Table of Contents
Advertisement
Using the TV Controller
Turn on the TV with the TV Controller button on the rear of the TV and then use the control menu. The Control menu appears
when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
Connecting to a Network
Connecting the TV to a network gives you access to online services, such as Smart Hub, as well as software updates.
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
The LAN Port on the Wall
LAN Cable (Not Supplied)
Network Connection - Wired
TV Rear Panel
Control menu
: Home
: Settings
: Return
The Control Stick is located on the
lower left corner of the back of
Wireless IP Router or Modem with
a DHCP Server
Connect your TV to your network using a LAN Cable.
- The TV does not support the network speeds less than or equal to 10 Mbps.
- Use a CAT 7 (*STP type) cable for the connection.
* Shielded Twist Pair
English - 5
: Source
: Power off
Control Stick
the TV.
w/v: Changes the volume.
</>: Changes the channel.
Advertisement
Table of Contents
