Table of Contents
Advertisement
Assembly
Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
One handle comes with this cabinet and can be
NOTE:
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (BB) and tighten with supplied
hex key
(CC).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
Optional Attachment
□
The workbench has pre-threaded holes on the back
and side of the unit for the installation of optional
pegboard back wall (Model #D6T09001). Refer to
huskytools.com or homedepot.com for more details.
NOTE:
Caster hubcap may be different than
shown in diagram.
BB
B
A
5
2
Attaching the casters
□
Be sure the drawers are locked and lay the cabinet (A)
□
t A
a t
h c
t
e h
s
w
v i
l e
a c
side as the handle, inserting bolts (AA) through the swivel
casters(D) and into the cabinet (A).
□
Tighten with supplied hex key (CC) or 12 mm wrench/socket.
□
Repeat this process for the xed casters (C) on the
opposite side of the cabinet (A).
□
Return the cabinet (A) to its upright position.
Do not over tighten the bolts.
CAUTION:
NOTE:
Caster hubcap may be different than
shown in diagram.
Please contact 1-888-HD-HUSKY for further assistance.
t s
r e
( s
) D
o t
t
e h
n u
, t i
n o
t
e h
A
D
HUSKYTOOLS.COM
a s
m
e
AA
Advertisement
Table of Contents
