Function List/Specifications; Index - Seiko SSJ013J1 Complete User Manual

8

FUNCTION LIST/SPECIFICATIONS

Functions to adjust the time
GPS signal reception → P. 16
Time zone adjustment
function....................................
→ P. 19
Manual time adjustment
function....................................
→ P. 21
Automatic time adjustment...
→ P. 24
Manual time difference
setting (selection)...................
→ P. 23
This function receives signals from GPS satellites,
identifies the time zone of the current location with one
button operation, and displays the correct current time.
Use this when traveling to a region in a different time zone.
* DST (daylight saving time or "summer time") is set manually
This function receives signals from GPS satellites and
displays the correct current time of the set time difference
(time).
Use this to set the correct time that is normally used.
This function determines suitable timing inside the watch
for receiving signals from GPS satellites, and
automatically begins reception of signals.
It displays the accurate current time for the set time
difference.
This function enables changing of the time difference. Also
use this function to set DST (daylight saving time or
"summer time").
ASTRON 3X62 GPS SOLAR

Index

Functions to charge
Solar Charging Function........
→ P. 14
Charging status display
function....................................
→ P. 13
Power Save Function.............
→ P. 28
49
The watch converts light to electrical energy and charges
the battery, using the solar cell beneath the dial. The watch
will operate for about 6 months on a full charge.
Roughly displays the energy charged in the watch. Also
shows whether the watch is able to receive GPS signals.
The Power Save mode can be activated in order to reduce
unnecessary energy consumption when the watch is left
without an adequate light source.