Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.This is
normal and the image can be re-adjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach the
CRT monitor temporarily until you have re-configured the system; preferably to 1920x1080
at 60Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Timing
640x480
640x480
640x480
720x400
800x600
800x600
800x600
1024x768
1024x768
1024x768
1280x1024
1280x1024
1280x1024
1440x900
1600x900
1680x1050
1920x1080
1920x1080
2-7 Flat Panel Monitor User's Guide
Refresh rate(Hz)
60Hz
72Hz
75Hz
70Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
75Hz
Advertisement
Table of Contents
