Operation; Installing The Charging Stand - Samsung VS20C95 Series User Manual

Operation

Installing the charging stand

2
1
3
14 English
1. Place the stand pipe on the bottom support,
and screw the pieces together using the
included small screw.
-
2. Insert the vacuum charging part at the top of
the stand pipe.
-
3. Connect the power cord to the rear of the
charging stand.
-
4
-
4. Plug in the charging stand.
Make sure the pieces are aligned correctly
and push it in firmly so that the screw hole
is aligned.
Do not disassemble it after attaching it.
Hold the connection part of the cord and
push it onto the connection pins firmly until
the gray lines on the tip of the cord are not
visible.
To make it easier to place the stand directly
against a wall, insert the cord into one of
the grooves on the bottom of the bottom
support.