Storing Channels Automatically - Samsung DW28A20 Owner's Instructions Manual

Storing Channels Automatically

TV Channel
√ √
Auto store
√ √
Manual store
√ √
Add/Delete
√ √
Sort
√ √
Name
√ √
Fine tune
Move Enter Return
TV Auto store
Country : Australia
Search : -/+
Move Adjust Return
TV Auto store
Country : Australia
Search : -/+
Move Search Return
P 1 S01 -----
106 MHz
Return
TV Sort
From : P 1 -----
To : P-- -----
Store : ?
Move Adjust Return
English - 28
➢
Available in Analog TV mode.
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU button.
Result: The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
2
Result: The options available in the Channel group are
displayed.
3
Press the ENTER button.
Result: The Auto store is selected.
4
Press the ENTER button again.
Result: The options available in the Auto store group are
displayed with Country is selected.
Select your country by pressing the œ or √ button. The countries
5
are displayed in the following order: Australia - Belgie -
Deutschland - España - France - Italia - Nederland - Schweiz
- Sverige - UK - East europe - Others.
Press the ▲ or ▼ button to select Search.
6
Press the œ or √ button to start the search.
7
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
button.
8
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the "Sorting the Stored Channels" procedure
on page 29.
◆ To exit from the channel store function without sorting the
channels, press the MENU button repeatedly until the menus
disappear.
9
When the channels have been stored, you can:
◆ Sort them in the order required (refer to page 29)
◆ Clear a channel (refer to page 32)
◆ Assign a name to the stored channels (refer to page 33)
◆ Fine tune channel reception if necessary (refer to page 34)
◆ Activate the Digital Noise Reduction feature (refer to page 37)