Table of Contents
Advertisement
I
N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV.
This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the VHF/UHF ter-
minal on the bottom
of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming cable
into the VHF/UHF
antenna terminal on back
of the TV.
2.2
C
T
: I
HAPTER
WO
NSTALLATION
Because this TV is
cable-ready, you do not need a
cable box to view unscrambled cable
channels.
Advertisement
Table of Contents
