KTM 150 SX 2021 Setup Instructions page 6

2 SETUP
4
–
Have a lift stand available.
Lift stand (78129955100)
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
Info
The procedure in the event of transport damage is
described in the customer service manual.
402051-01
–
Remove the cardboard from around the shock absorber.
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever
on angle lever
–
Mount and tighten screw
Guideline
A00001-11
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the
screw more easily.
–
Route the clutch line with the clutch master cylinder
toward the front between the upper and lower triple
clamps.
–
Install the fork legs. (
1
.
M14x1.5 60 Nm
(44.3 lbf ft)
2
.
M10 60 Nm (44.3 lbf ft)
Loctite
p. 10)
® 2701™