Appendix; Powersaver - Samsung SyncMaster 70S User Manual

3_E70Sbody.fm Page 16

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The available modes are "On", "Standby", "Sleep", and "Deep
Sleep".
PowerSaver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 2
below for details.
Table 2. Power-saving modes
State
Horizontal Sync Active
Vertical Sync Active
Video Active
Power
Green
Indicator
Power 42 W (Max.)
Consumption 40 W (Nom.)
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
NERGY
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Monday, August 13, 2001

Appendix

Power-Saving Function mode (EPA/NUTEK)
Normal
Operation
Standby Mode
Inactive
Active
Blanked
Amber
Less than 5 W
®
S compliant and NUTEK compliant when used with a
TAR
English
10:18 AM
Sleep Mode Deep Sleep Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Amber Amber
Blinking Blinking
(0.5 sec. interval) (1 sec. interval)
Less than 5 W Less than 5 W
16