Samsung SyncMaster 400UXn-UD Quick Start Manual page 6

Introduction
POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.
POWER
The power cord plugs into the LCD Display
and the wall outlet.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
RGB / COMPONENT IN (PC Connection
Terminal (Input))
• Use a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
• Connect the [RGB/COMPONENT IN]
port on the monitor to the COMPONENT
port on the external device using the D-
SUB to COMPONENT cable.
• Connect the [RGB / COMPONENT IN]
port on the monitor to the BNC port on the
PC using the RGB to BNC cable.
DVI IN (PC Video Connection Terminal)
Use a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)
DVI/RGB/HDMI AUDIO IN (PC/DVI/
HDMI Audio Connection Terminal (Input))
AV/COMPONENT AUDIO IN [L- AUDIO-
R]
Connect the port of the DVD, VCR (DVD /
DTV Set-Top Box) to the [L- AUDIO - R] port
of the LCD Display.
DVI OUT
• Connect a monitor to another monitor
through a DVI cable.
12