Setting Up Your Lcd Tv/Monitor; Setting Up An Ergonomic Workstation; Lcd Tv/Monitor Location; Workstation Height - Samsung SyncMaster 211MP Owner's Instructions Manual

BN68-00169C-00_NTSC ENG
Setting up an Ergonomic
Workstation
Consider the advice given below before you install
your LCD TV/Monitor.

LCD TV/Monitor location

Choose a position that exposes your LCD TV/Monitor
to the least reflection from lights or windows, usually
at a right angle to any window.

Workstation height

Place your LCD TV/Monitor so that the top of the
screen is slightly below your eye level when
you are comfortably seated.

Viewing angle

Tilt the screen until you feel comfortable working
with your LCD TV/Monitor.
The maximum tilt angle is 15 degree to the
backward direction. Please do not tilt the LCD
TV/Monitor other than specified range.
Excessive force to tilt the LCD TV/Monitor
other than specified range may give
permanent damage to the mechanical part of
the stand.
8
2/5/02 3:41 PM Page 8

Setting up Your LCD TV/Monitor

Plug and Play

The adoption of the new VESA ® Plug and Play
solution eliminates complicated and time consuming
setup. It allows you to install your LCD TV/Monitor in
a Plug and Play compatible system without the usual
hassles and confusion. Your PC system can easily
identify and configure itself for use with your display.
This LCD TV/Monitor automatically tells the PC
system its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols
so the PC system can automatically configure itself
to use the flat panel display. If your PC system needs
a monitor driver, follow the instructions given below
according to the operating system your computer
uses.

Installing the Monitor Driver

The CD that accompanies this product contains the
necessary drivers for installing your LCD TV/Monitor.
Please refer to the driver installation instructions
included with your CD package for more information.