Sound Field (Dsp)/Eq Function; Setting The Clock - Samsung MM-DT10 Instruction Manual

Sound Field (DSP)/EQ Function

DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Press DSP/EQ button.
•
"DSP" appears on the display panel.
•
Each time the button is pressed, the selection changes as follows:
•
Note
DSP/EQ function is only available in STEREO mode.
•
This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and
Dolby Digital discs.
•
When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ function
does not work.
POPS, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
45
PASS: Select this for normal listening.

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system Press
1 2
on by pressing
TIMER/CLOCK
POWER button.
twice.
•
CLOCK is displayed.
When the correct
When the correct
4 5
hour is displayed,
time is displayed,
press ENTER.
press ENTER.
The minutes flash.
• •
Increase the minutes : "TIMER" appears in the display.
• •
Decrease the minutes : The current time is now set.
Note
•
You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
GB
3
Press ENTER.
The hour flashes.
•
Increase the hours :
•
Decrease the hours :
46