Table of Contents
Advertisement
Service Wheel (optional)
A service wheel lever is located at the rear end of the unit. This lever will engage a wheel and elevate the rear end of
the unit. The treadmill can then be easliy moved for cleaning or servicing.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Engage service wheel
1. Unplug power cord from power outlet.
2. Grasp the service wheel lever and slide to the right and down to lock in place.
The service wheel will lower and raise the rear feet off the floor.
3. Move treadmill as needed.
Disengage service wheel
WARNING: Trip and fall hazard.
To avoid injury, make sure service wheel lever is not engaged prior to use.
1. Grasp the service wheel lever and slide to the right, lift up, and slide to the left.
Item
1
2
Item
1
2
3
4
Item
1
2
Page 16 of 36
Description
Service wheel lever
Frame
Description
Service wheel
Rear feet
Floor
Service wheel lever
Description
Service wheel lever
Frame
Qty.
1
1
Qty.
1
2
1
1
Qty.
1
1
Advertisement
Table of Contents
