Shooting - Samsung DIGIMAX 360 User Manual

Shooting

You can select continuous shooting or AEB(Auto Exposure Bracket ) shooting in this
menu.
1. Rotate the mode dial to the STILL IMAGE mode and press the
MENU button.
2. Select the [SHOOTING] menu by pressing the UP/DOWN
button.
3. Press the RIGHT button and the cursor will shift to the
[SHOOTING] sub menu.
4. Select the desired sub menu by pressing the UP/DOWN
button.
5. Press the OK button to confirm the setting.
SINGLE
CONTINUOUS : In this mode, you can capture moving
AEB
When you select continuous shooting, a window will display as
shown alongside. Select the number of continuous shots by
pressing the UP/ DOWN button. Depending on the memory
capacity, the number of continuous shots may vary.
6. Press the menu button and the menu display will disappear.
Take a picture.
INFORMATION
The flash mode is set to "flash off" in continuous shooting and AEB shooting. After
completing the continuous or AEB shot, the shooting mode is changed to [SINGLE]
automatically.
Once a continuous sequence has begun, it will continue until the selected number of shots
has been taken. Releasing the shutter button will not interrupt this function.
: you can take only one picture at a time.
subjects continuously.
: In this mode, you can take a 3-image
bracket(-0.5EV, 0.0EV, +0.5EV) of a
scene.
STILL IMAGE 1/2
SIZE
QUALITY
EFFECT NORMAL
SHOOTING
EXIT:MENU CHANGE:
STILL IMAGE 1/2
SHOOTING
SINGLE
CONTINUOUS
AEB
BACK: SET:OK
STILL IMAGE 1/2
# OF SHOOT
BACK: SET:OK
43